Construction: 🏗️Powering Construction Sites with Jmbatteries
⚡ Why Construction Needs a Smarter Power Source
🛠️ Run Tools, Trailers, HVAC & Lighting
Jmbatteries provides stable 110V/220V AC power via multiple NEMA outlets. It perfectly supports simultaneous operation of drills, circular saws, air compressors, trailer HVAC systems, and high-brightness lighting—no power fluctuations to disrupt work.
🚧 Built for Remote Job Sites
Equipped with all-terrain casters and forklift-compatible slots, Jmbatteries power units easily access remote or rough-terrain job sites. No need for fuel deliveries or special handling—just place, plug in, and start powering.
🧰 All-Day Runtime with Zero Refueling
Powered by high-capacity 120 kWh lithium-ion batteries and 20 kW pure sine wave inverters, Jmbatteries runs continuously for 10–16 hours without downtime. It’s completely silent, emission-free, and requires no oil changes or fuel storage.
🌍 Lower Job Costs and Environmental Impact
💸 Cut Fuel and Maintenance Expenses
Eliminate costs for fuel procurement, transportation, and engine maintenance. Jmbatteries reduces long-term job site power expenses by up to 70% compared to traditional generators.
🌱 Zero Emissions, Quiet Operation
Ideal for urban construction sites and eco-focused contractors. No exhaust fumes, no noise pollution (avoids noise complaints), and no need for complex emission permits—simplify compliance with local environmental rules.
⚙️ What Construction Gear It Powers
🛠️ Power Tools & Heavy Equipment
- Table saws, concrete mixers, air compressors
- Welders, scissor lifts, battery-powered forklifts
🏕️ Job Trailers & Temporary Structures
- HVAC systems, lighting, refrigerators, office laptops, network routers
- On-site offices, break trailers, and material storage facility utilities
💡 High-Intensity Lighting
- LED tower lights for large-area illumination
- Emergency night shifts or winter low-light operations
🔋 EV Equipment Charging
- Battery-powered lifts, excavators, and construction trucks
- Built-in CCS1 15kW EV charging port for fast equipment recharging
🔌 How to Charge Jmbatteries On-Site
⚡ Grid Plug-In
240V 50A NEMA SS2-50P input port. Charge at headquarters, warehouses, or job site trailers—full charge in 3.5–5 hours.
☀️ Solar Charging
Compatible with on-site rooftop or ground-mounted solar arrays. Supports up to 16kW input via dual 180A Anderson connectors. Full recharge via solar in approximately 5.5–7 hours.
🔋 Generator Support
If grid and solar are unavailable, Jmbatteries accepts 6–12kW gas or diesel generator input—full charge in 5–8 hours.
⚡ Combine All Sources
Need rapid recharging? Combine solar + grid + generator to charge Jmbatteries from 10% to 95% in just 2 hours.
🚧 Key Construction Problems Solved by Jmbatteries
- Fuel Supply Issues: Skip frequent fuel deliveries, reduce fire/flammability risks from on-site fuel storage.
- Noise Restrictions: Operate smoothly in residential areas or urban centers without exceeding noise limits.
- Jobsite Setup Time: No need for emission permits or waiting for grid connection—start using immediately after placement.
- Equipment Clutter: Jmbatteries integrates power storage and mobility in one unit, reducing on-site equipment redundancy.
- Emissions Regulations: Meets Tier 4 and global zero-emission job site requirements, avoiding compliance penalties.
📊 How Jmbatteries Compares to Jobsite Generators
| Feature | Jmbatteries | Diesel Generator |
|---|---|---|
| Power Output | 20kW Pure Sine Wave | 5–20kW (Varies) |
| Runtime | 10–16 hrs (120 kWh) | 6–8 hrs (10–20 gal) |
| Charging Options | Grid, Solar, Generator | Fuel Only |
| Emissions | Zero | CO₂, NOx, Particulates |
| Noise | Silent | 70–90 dB |
| Maintenance | None | High (oil changes, filter replacements) |
| Fuel Cost (Weekly) | $0 | $150–$400 |
🏢ABOUT US：
- 📞+86 153 4306 3084
- ✉️sales02@jmenergytech.com
- 🌐https://jmbatteries.com/
